05 July 2018

Common Home Repairs You Can Easily Take Care of Yourself

If you know that you have a lot of problems around the house then you may find it difficult to find the time to get everything done. You may think that the cost of hiring someone to take care of every repair you have is just far too much, and that nothing you can possibly do could ever be good enough. This is not the case at all, and even if you have no DIY experience, there are still home repairs that you can do yourself.

Toilet Levers and Handles--

If the lever to your toilet is broken then all you have to do is open up the tank and replace the chain. Before you do this, you just need to make sure that the handle is not corroded or that any of the pieces that connect the handle are broken. This can include the metal rod, nut or handle. You can replace all of these items yourself anyway and they are super affordable to do. All you need to have is an adjustable wrench and you could have the whole thing done in 10 minutes, flat.

Leaky Pipes--

The most common pipe leaks happen under the bathroom sink or even the kitchen sink. They tend to involve a washer that has worn out or a compression nut that has split. This means that water can seep out and eventually this will cause real problems throughout your home. If you want to fix problems like this then you need to turn the water off. Once the water has been turned off, then place a bucket underneath the pipe. Twist off the pipe that has the broken nut or washer and put the new one back on. If you don’t have the right tools for the job then check out https://www.thesharpcut.com/ to see if they can give you the support you need.

Replacing Light Switches--

A lot of electrical work in the home should be done by someone who is experienced or at least with some level of professional knowledge. The risk of dealing with electricity when you have no idea what you are doing is very high. Light switches on the other hand are very easy for you to replace so if you do have a light switch that is on the fritz then it is possible for you to do something about this. Use a screwdriver to remove the face plate and then take the switch off the wall. Two wires will connect to the screws. It helps to make sure that there is no electricity running between them, and when you have done this, detach them and screw them onto the new switch. When you have done this, it is then very easy for you to install the new face plate.

So there are so many things that you can do to try and get a better result out of your DIY, and by following the above tips, you can be sure to get any job done with ease.

No comments: